香蕉网视频

 China Wood Industry Network

How to make the top ten custom furniture cabinets

Source: customized furniture ranking

How to make the top ten custom furniture cabinets

The wardrobe can be regarded as the necessary furniture in the bedroom. Compared with the finished wardrobe with fixed mode, the customized wardrobe makes full use of the interior space, and has strong storage capacity and more diversified functions, which has become the choice of more families. However, the actual selection will have many problems, such as what kind of board to use for customized wardrobe, the quality of accessories, the calculation of the whole price, etc. Today, Xuebao board takes you to pay attention to these details. It can avoid the trouble of customizing the wardrobe.

Custom wardrobe panel details:

The common wardrobe board can be divided into particle board, finger joint board, density board, ecological board and so on. Because of its smooth surface and good bearing strength, density board is mostly used to make cabinet door and back board. Like ecological board and multilayer board, these structural strength, moisture-proof performance of the board, is very suitable for making the base material of wardrobe, cabinet, bath cabinet.

When customizing the wardrobe, pay attention to whether the quality and thickness of the back plate and side plate are the same, so as to ensure that the overall wardrobe can be divided into sufficient structural strength. The common thickness of the wardrobe is 9mm. 5mm thick board is easy to crack and deform after a long time. 18mm thickness is very strong, but the cost is high.

In the environmental protection of the board, first observe whether the edge sealing of the plate is comprehensive and whether the workmanship is tight and delicate. If the edge is not well sealed, the board is not only easy to be affected by damp and swell, but also easy to volatilize internal formaldehyde and pollute the living environment. The glue content of different types of boards varies greatly, and the types of glue used are different. Therefore, the most direct way is to consult the environmental protection grade of the board and read the test report. Only when it is no less than E1 level can it be used for interior decoration. In particular, some do not produce customized home manufacturers, plate sources and quality must be asked clearly.

Custom wardrobe hardware details:

Wardrobe is often repeated use of furniture, to long-term use, not only to check the quality of the board, select the quality of hardware details also obviously affect the actual use, so first of all, we must choose the big brand, not greedy for small and cheap.

The door closet depends on the friction between the guide rail and the pulley, which can be experienced by hand during inspection. If the noise generated by pushing and pulling is small and the movement is smooth, it means that the friction is small and the service life is long. The closets with concealed doors can feel the handle comfort first and then open them. The hinged cabinet doors with good quality can be opened smoothly with small vibration amplitude, and some of them can also play a certain buffer effect when rebounding.

Custom wardrobe price details:

There are two pricing methods for customized wardrobe: unfolded area and projected area (also known as hole area). In fact, the two algorithms have their own advantages and disadvantages, and there is no absolute saving money.

The unfolded area is to divide the whole wardrobe structure, and calculate the cabinet body, cabinet door, partition, drawer, etc. according to the area, and add the hardware and other related accessories to get the pricing result. The projection area is relatively simple, which can be multiplied by the width and height of the cabinet. Now more and more big brands of customized wardrobe use unfolded area calculation.

The expansion area needs to be measured and designed in advance. Although complicated, it is also accurate and in place. Drawer shelves can be added according to needs, which is more humanized. The disadvantage is that the wardrobe can't be measured before it is made. If the manufacturer falsely reports the area, it is easy to get the wrong money. According to the projection area is known to know the price, but the price per unit area is higher than the former, if the wardrobe design is simple, it will be very uneconomical. Therefore, if the cabinet structure is relatively simple, and most of the suspension area, it is more appropriate to calculate according to the unfolded area. On the contrary, the projection area will be more cost-effective if shelf and drawer are mainly used. At the same time, we need to carefully review the drawings, and pay more attention to it if we calculate according to the developed area.

In addition to the simple introduction of Xuebao board above, when customizing the wardrobe, whether the size measurement is accurate, whether the design and manufacturing is professional, and whether the brand service is in place are all noteworthy points. I hope you can solve all kinds of problems of wardrobe customization after you understand the information, so as to save energy and avoid stepping on the pit.